精密管性价比高

山东大鼎钢管厂主要材质：20、35、45、20G、20A、40Mn2、45Mn2、27SiMn、40MnB、20MnVB、20MnB、20MnVB、20铬30铬35铬20铬20铬20铬、35Cr铬、20Mn2结构管>流体管GB/T3087-99中低压锅炉管GB/T5310-95高压锅炉管GB/T79-2000化肥专用管、液压支撑管12Cr1MoVG、12Cr2MoWVTiB、12Cr3MoVSiTiB高压合金管GB/T9948-85石油裂解管GB9948-88地质钻探管YB235-70汽车半轴套YB/T5035-96等标准无缝钢管，我公司现有库存过剩吨1000多个品种供您选择主导产品：结构管、流体管、锅炉管、化肥管、合金管、异型管、精密冷拔管、大口径厚壁管；

山东大鼎金属材料有限公司Bearing steel pipe is a common rolling bearing ring made of hot rolled or cold drawn seamless steel pipe. The outer diameter of the steel pipe is 25-180 3.5-20mm, and it is divided into two Bearing steel is required to have high hardness and wear resistance, as well as high performance limit, because bearing bearings bear a lot of pressure and friction at work. The uniformity of chemical composition, the content and distribution of non-metallic inclusions and the distribution of carbides in bearing steel are strictly required. It is one of the most stringent steel grades in all steel production.

山东大鼎金属材料有限公司Precision seamless steel pipe (cold-drawn and cold-rolled) has high precision, no oxidation coating inside and outside the pipe, smooth and smooth surface, uniform wall thickness, high precision, small diameter of thin-walled tube to ensure that the error of the outside diameter of the tube in the inner and outer surface of the pipe presents varying degrees and quantities of corrugated ring marks, some are continuous, some are intermittent, may be the entire circle, there are. Not the whole circle. poor quality of pickling and lubrication, increase and change of friction during drawing, mechanical properties of steel pipe in length direction after heat treatment are not consistent, mandrel length and fineness are too large, and the position of mandrel before.

山东大鼎钢管厂拥有台大中型冷拔机、两台辊底热处理炉、台大中型穿孔机和台热轧钢管机组三套先进的生产设备和成熟的生产工艺。公司拥有现代化的科研中心，拥有强大的性能测试、工艺性能测试、涡流测试、超声波测试、水力测试、金相测试、高精度碳硫分析等一整套测试方法，并拥有一批高素质的技术人员和检查员。硬度试验是根据规定的条件将硬质压头缓慢压入试样表面，然后测试压痕深度或尺寸，从而确定材料的硬度。